The CFA 6150 multipurpose jack
The CFA 6150 multipurpose jack has a capacity of 15 tonnes and is installed directly at the bottom of the pit (no tracks to install or work on the sides of the pit). The CFA 6150 has in addition to the CFM 6150 a rapid pneumatic approach mechanism of the jack until contact with the load. In order to assist the maintenance technician it has a steering grip, 2 pivoting and 2 large diameter wheels (150 mm).
The 6150 is known as a ‘multipurpose’ type due to its versatility
Its lifting capacity and its structure permit both a slight raising of the vehicle by its axle and removal of heavy components, such as gearboxes.
|Max. height||mm||1 985|
|1st piston diam.||mm||110|
|2nd piston diam.||mm||80|
|Pit edge roller wheels diam.||mm||-|
|Pit edge roller wheels width||mm||-|
|Pump||Manual + Oleo-pneumatic|
For more safety:
- Overload limit
- Safety valve
- Down: “Deadman” position
**Pit floor jack:
- Capacity: 15 t
- 2-speed pump
- 2 swivel wheels with latches and 2 fixed wheels with large diameter (150 mm) for more manoeuvrability
10 tons cross beam
Ref : COZ 6440
Beam with 2 sliding supports.
Capacity: 10 t
Set of 2 flat saddles
Ref : COZ 6442
Set of 2 flat saddles for COZ 6440
Ref : COZ 6441
Set of spacers for COZ 6442 enabling to increase the height of jacking up.
Set made of 3 pairs of 80, 200 et 300 mm.
Ref : COZ 6443
This option enables you to approach mechanical assemblies or vehicles quickier.
Ref : COZ 671 / 6160
|Feature||COZ 671||COZ 6160|
*: Assembling receptacle on demand