The CBA 6605 jack
The SEFAC CBA 6605 pit edge jack adapts to all types of inspection pits. However, it’s necessary to take the precise measurements in the repair workshop, since the cradles are tailor-made to fit your pit.
The CBA 6605, rapid approach and manual lifting
Unlike the CBA 6565, the CBA 6605 has a capacity of 20 tonnes. It has a rapid pneumatic approach which automates the raising of the jack until it makes contact with the load. The lifting of the load is then carried out manually. The CBA 6605 offers a stroke of 700 mm, allowing you to raise the vehicle via an axle. Unlike multipurpose type jacks, this is a lifting jack that does not have a transmission removal function.
|Min. pit depth||mm||1 150|
|Min. distance between jacks||mm||-|
|Max. distance between jacks||mm||-|
|Motorization||Manual + Oleopneum.|
***: SEFAC pit side jacks are suitable for all types of pit.
Nevertheless, as pits do not have standard dimensions, precise measures will have to be taken by ordering.
Set of 2 blocks
Ref : CBZ 499
Set of 2 flat blocks for CBZ 500 and CBZ 501
15 tons cross beam
Ref : CBZ 500
15 tons beam for CBM 6565
20 tons cross beam
Ref : CBZ 501
20 tons beam for CBM 6605
Set of 2 V-saddles
Ref : CBZ 503
Set of 2 V-saddles for CBZ 500 or CBZ 501.
Additional extensions 100 mm
Ref : CBZ 504
Set of 2 additional extensions (100 mm) for CBZ 503
Additional extensions 150 mm
Ref : CBZ 505
Set of 2 additional extensions (150 mm) for CBZ 503
Additional extensions 200 mm
Ref : CBZ 506
Set of 2 additional extensions (200 mm) for CBZ 503
Ref : CBZ 572
Set made of a CBZ 503, a CBZ 504, a CBZ 505 and a CBZ 506 for CBM 6565 or CBM 6605.